Translucent Amber Miniature Polyimide Tubing, 42 AWG, 0.0024" ID, 0.0034" OD, 0.0005" Wall, 30" Length

Translucent Amber Miniature Polyimide Tubing, 42 AWG, 0.0024" ID, 0.0034" OD, 0.0005" Wall, 30" Length Review

When thin walls, tight tolerances and high strength are required, polyimide is the material of choice. Polyimide is in the select group of super polymers and is now available in micro and miniature tubing sizes. Our tubing has a thermal rating of -452F (-269C) To 700F (371C) for continuous use application with a dielectric constant of 3.4. This material is considered a benchmark for polymers in electrical insulation applications. This tubing exhibits exceptional dimensional stability and has very high burst pressure ratings. Excellent column strength and high stiffness has proven to provide good push and torque properties making polyimide tubing an excellent choice for catheters that are guided through the body's vascular system. Other uses include high strength, temperature and chemical resistant push rod tubes, and miniature structural matrices. This tubing can be steam, gamma or EtO sterilized and has excellent chemical resistance. Polyimide tubing can be bonded with cyanoacrylates, UV and room temperature cure epoxies.

Brown Polyurethane Tubing, 0.063" ID, 0.125" OD, 0.031" Wall, 25' Length

Brown Polyurethane Tubing, 0.063" ID, 0.125" OD, 0.031" Wall, 25' Length Review

Superthane Pneumatic Tubing is manufactured from hydrolysis-resistant polyurethane to withstand moisture, humidity, and fungi. Its natural flexibility allows for tight bending in and around equipment, making it a good choice for pneumatic control, automated machinery, robotics, lubrication lines, fluid circuitry, and instrumentation applications. Produced from ether-based polyurethane material, Superthane Pneumatic Tubing does not contain any plasticizers, ingredients used to impart flexibility, that can leach out and cause flow contamination. The tubing resists radiation exposure, kinking, tearing, abrasion, and impact, in addition to moisture. Superthane Pneumatic Tubing offers excellent cold temperature flexibility and virtually unlimited flexural life. It may be used at temperatures ranging from -90F to 175F. Superthane Pneumatic Tubing is a durable product manufactured to resist more pressure or vacuum than corresponding sizes of PVC or rubber.

Raychem VERSAFIT-3/8KT2R Polyolefin Heat Shrink Tubing .400" ID, 14 6" Pieces (Pack of 5)

Raychem VERSAFIT-3/8KT2R Polyolefin Heat Shrink Tubing .400" ID, 14 6" Pieces (Pack of 5) Review

Raychem VERSAFIT-3/8KT2R Polyolefin Heat Shrink Tubing .400" ID, 14 6" Pieces (Pack of 5) Feature

• 2 to 1 Shrink Ratio
• Minimum shrink temp 70 (158F)
• Operating temperature range -55C (-67F) to 135C (275F)
• Low temp. shrink reduces risk to temperature sensitive components
• Free of PBBs, PBBOs, PBBEs which are classified as environmentally hazardous

Versafit polyolefin shrink tubing is highly flame retardant, very flexible, and has a low shrink temperature. It is a cost effective choice for commercial and military applications with good electrical insulation and strain relief. Easily hot stamped for identification.

Translucent Amber Miniature Polyimide Tubing, 31 AWG, 0.0089" ID, 0.0104" OD, 0.00075" Wall, 30" Length

Translucent Amber Miniature Polyimide Tubing, 31 AWG, 0.0089" ID, 0.0104" OD, 0.00075" Wall, 30" Length Review

When thin walls, tight tolerances and high strength are required, polyimide is the material of choice. Polyimide is in the select group of super polymers and is now available in micro and miniature tubing sizes. Our tubing has a thermal rating of -452F (-269C) To 700F (371C) for continuous use application with a dielectric constant of 3.4. This material is considered a benchmark for polymers in electrical insulation applications. This tubing exhibits exceptional dimensional stability and has very high burst pressure ratings. Excellent column strength and high stiffness has proven to provide good push and torque properties making polyimide tubing an excellent choice for catheters that are guided through the body's vascular system. Other uses include high strength, temperature and chemical resistant push rod tubes, and miniature structural matrices. This tubing can be steam, gamma or EtO sterilized and has excellent chemical resistance. Polyimide tubing can be bonded with cyanoacrylates, UV and room temperature cure epoxies.

White Translucent Miniature PTFE Tubing, 10 AWG, 0.098" ID, 0.102" OD, 0.002" Wall, 72" Length

White Translucent Miniature PTFE Tubing, 10 AWG, 0.098" ID, 0.102" OD, 0.002" Wall, 72" Length Review

PTFE is the purest, most inert material in the fluoropolymer family. The unique properties of PTFE (sometimes known as Teflon) has made it the polymer of choice in many advanced applications. With the lowest coefficient of friction of any polymer and an extremely broad temperature range (-454 Degrees F to 500 Degrees F), PTFE has been designed into products from advanced medical devices to high temperature industrial equipment. Because of its unparalleled chemical resistance and excellent chemical inertness, PTFE has become the benchmark plastic for the chemical, bio-medical and analytical sciences industries. Small Parts Inc.stocks these miniature thin wall sizes that you probably wont find anywhere else.

White High Density Polyethylene (HDPE) Tubing, 3/8" ID, 1/2" OD, 1/16" Wall, 100' Length

White High Density Polyethylene (HDPE) Tubing, 3/8" ID, 1/2" OD, 1/16" Wall, 100' Length Review

High Density Polyethylene (HDPE) Tubing is made from corrosion resistant material that has higher impact strength, and a higher operating temperature than LDPE. It has excellent tensile strength, energy absorption, abrasion resistance and resistance to stress cracks.

Dynalon 610855-37 ID: 1", OD: 1-3/8" Food Grade Vinyl / PVC Tubing (Case Of 50-Feet)

Dynalon 610855-37 ID: 1", OD: 1-3/8" Food Grade Vinyl / PVC Tubing (Case Of 50-Feet) Review

Dynalon 610855-37 ID: 1", OD: 1-3/8" Food Grade Vinyl / PVC Tubing (Case Of 50-Feet) Feature

• ID: 1in
• OD: 1-3/8in
• Transparent and inert
• Clear
• Non-toxic

Vinyl laboratory tubing is non-toxic, transparent and inert. This smooth and flexible tubing is chemical resistant with a specific gravity of 1.2 and a tensile strength of 2000 psi.  Our Vinyl FoOD: Grade Tubing is designed for use in the laboratory with an elongation of 400% and excellent aging characteristics. Durometer hardness, shore A of 68 with a temperature resistance of 212°F and a brittle temperature of -40°C. galass-like transparency; smooth, dense bore will not harbor bacteria or provide a surface receptive to sediment build-up. Conforms to all FDA, USDA and 3-A milk handling standards. May be steam sterilized. ID: 1in. OD: 1-3/8in. 50ft/Case. Dynalon® #: 610855-37.

Polyurethane Metric Tubing, 10 mm OD, 6.5 mm ID, 20 m Length, White

Polyurethane Metric Tubing, 10 mm OD, 6.5 mm ID, 20 m Length, White Review

SMC's TU series metric polyurethane tubing represents a new high quality standard in metric size polyurethane tubing.

Black Viton Soft Tubing, 3/8" ID, 9/16" OD, 3/32" Wall, 1' Length

Black Viton Soft Tubing, 3/8" ID, 9/16" OD, 3/32" Wall, 1' Length Review

Made of 100 percent pure Type B Viton, a high performance synthetic rubber. Specifically deisgned for use with peristaltic pumps, this tubing has excellent temperature resistance with an operating range of -40 F to 400 F continuously; 600 F periodically. It also offers the widest range of fluid and chemical resistance of any commercial rubber - oils, fuels, lubricants, most mineral acids, also resistant to many aliphatic and aromatic hydrocarbons such as carbon tetrachloride, benzene, toluene, and xylene. Viton has excellent resistance to environmental exposure such as sunlight and ozone. Other applications include fuel and oil lines, cable jacketing, solvents, chemical lines, hot lubrication, seals, and o-rings.

Ridgid 32925 Tubing and Conduit Cutter

Ridgid 32925 Tubing and Conduit Cutter Review

Ridgid 32925 Tubing and Conduit Cutter Feature

• Cuts clean square cuts
• Cuts copper, brass, aluminum and thin wall conduit
• Includes X-CEL knob for quicker cutting
• Capacity: 3/16-Inch-1-1/8-Inch
• Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.

Clean, square cuts are easily made on copper, brass, aluminum, and thin-wall conduit. Nos. 10, 15, 20 feature a convenient fold-away reamer. No. 30 is rated for larger diameter steel and stainless steel tubing. No. 15-SI is especially designed for stainless steel tubing. Heavy-Duty Wheel.

Clear Polycarbonate Tubing, 3/4" ID, 7/8" OD, 1/16" Wall, 36" Length

Clear Polycarbonate Tubing, 3/4" ID, 7/8" OD, 1/16" Wall, 36" Length Review

Polycarbonate is a transparent high molecular weight, linear, low-crystalline plastic. It is generally sought out for its very high impact resistance which approaches 30 times that of safety glass. Light transmittance is 90 percent. In addition to being a very hard plastic, it has a very high modulus of elasticity making it resistant to creep; it has excellent electrical resistivity, and an operating temperature range of -275 F to 250 F. It is generally unaffected by greases, oils and acids. Hardness is 112-125 Rockwell R (73-78 M Scale). Heat deflection temperature is 275-285 Degrees F at 264 PSI. Easily fabricated by machining, drilling, and sawing with a low likelihood of cracking or chipping. Solvent resistance is poor but polycarbonate is easily bonded. Prolonged exposure to solvents with the material under stress will result in crazing and cracking.

Rubber Tubing, 7/16" OD x 5/16" ID x 1/16" Wall 10' Length

Rubber Tubing, 7/16" OD x 5/16" ID x 1/16" Wall 10' Length Review

Rubber Tubing, 7/16" OD x 5/16" ID x 1/16" Wall 10' Length Feature

• NSF - 51
• Peristaltic Pump Tubing
• Excellent Flex Fatigue
• Good Tear Resistance
• Autoclavable

TPR (Thermoplastic Rubber) polypropylene based tubing offers excellent flex fatigue resistance and good tear resistance making it an ideal choice for peristaltic pump applications. The tubing meets NSF - 51 and is suitable for a variety of clean uses and is autoclavable. TPR provides outstanding compression characteristics and combines the processability of plastics with the durability of rubber.