General Pipe Cleaners ATC34 3/4-Inch AutoCut Copper Tubing Cutter

General Pipe Cleaners ATC34 3/4-Inch AutoCut Copper Tubing Cutter Review

See more picture @ amazon.com

General Pipe Cleaners ATC34 3/4-Inch AutoCut Copper Tubing Cutter Feature

• For 3/4-Inch copper pipe
• Ratchet turning handle RH34 optional
• Hardened steel cutting wheels
• Ideal for stub-out work
• Spring loaded cutting wheel

Great tool to have when you don't have enough swing room to use a full size tubing cutter. You can cut copper tubing with less than 1'' of clearance. Quicker than conventional cutters. Just snap it on the tube, close the gate and turn it in either direction. The cutter wheel automatically tightens as you turn the autocut, no knobs to twist. The cutter wheel is spring loaded to provide a constant cutting pressure. Long lasting hardened steel cutting wheels. Refer to model

Milwaukee 2471-21 12-Volt Copper Tubing Cutter Kit

Milwaukee 2471-21 12-Volt Copper Tubing Cutter Kit Review

See more picture @ amazon.com

Milwaukee 2471-21 12-Volt Copper Tubing Cutter Kit Feature

• 12V LITHIUM-ION battery for longer run-time
• Close quarter rotating cutting head cuts pipe in confined spaces
• Automatic adjustment from 3/8” – 1” tubing with Auto locking mechanism and Water resistant metal cutter head
• Ergonomic, compact, and lightweight design for operator comfort and Ultra-efficient drive mechanism delivers over 200 cuts per charge
• Battery Fuel Gauge displays remaining run-time and Built-in LED light illuminates work surface

The M12 Copper Tubing Cutter is specifically designed for cutting copper with the speed and versatility that plumbers, mechanical contractors and remodelers require. A 12V Li-Ion battery and ultra-efficient gearing ensures over 200 cuts on a single charge. Cordless: Yes, Volts: 12, Inside Cutting Radius (in.): 3/8 to 1, Battery Included: Yes, Charger Included: Yes, Case Included: Yes

FLINT GLASS TUBING, 5MM OD X 1' Length

FLINT GLASS TUBING, 5MM OD X 1' Length Review

See more picture @ amazon.com

FLINT GLASS TUBING, 5MM OD X 1' Length

Aluminum 6063-T5 Square Tubing, ASTM B221, 3/4" x 3/4", 0.062" Wall, 72" Length

Aluminum 6063-T5 Square Tubing, ASTM B221, 3/4" x 3/4", 0.062" Wall, 72" Length Review

See more picture @ amazon.com

Aluminum 6063-T5 Square Tubing, ASTM B221, 3/4" x 3/4", 0.062" Wall, 72" Length Feature

• ASTM B221
• Alloy 6063 T5
• Square Tubing
• Good Corrosion Resistance
• Heavy Wall

Aluminum Square Tubing 6063 T5 ASTM B 221 Offers heavy-wall strength for applications that require resistance to stress cracking and corrosion. Alloyed with Magnesium and Silicon, this type of Aluminum is widely used for structural and fabrication needs, and has good formability.

Value Plastics Bondable Tee 200 Series Barb, 1/16" (1.6 mm) ID Tubing, White ABS (Pack of 10)

Value Plastics Bondable Tee 200 Series Barb, 1/16" (1.6 mm) ID Tubing, White ABS (Pack of 10) Review

See more picture @ amazon.com

Value Plastics Bondable Tee 200 Series Barb, 1/16" (1.6 mm) ID Tubing, White ABS (Pack of 10) Feature

• Tee Connector
• White

Value Plastics offers designers worldwide the broadest selection of male and female luer fittings and connectors. Over 120 separate configurations are offered in nylon, polypropylene, polycarbonate and PVDF. Tubing connections range from 1/16 inch (1.6 mm) to 1/4 inch (6.4 mm) IDs, with threaded ends and panel mount versions also available. All Value Plastics luer fittings and connectors interconnect with products manufactured to ISO Standards 594-1 and 594-2.

Stainless Steel 316 Hypodermic Tubing, 14 Gauge, 0.083" OD, 0.063" ID, 0.01" Wall, 36" Length

Stainless Steel 316 Hypodermic Tubing, 14 Gauge, 0.083" OD, 0.063" ID, 0.01" Wall, 36" Length Review

See more picture @ amazon.com

Stainless Steel 316 Hypodermic Tubing, 14 Gauge, 0.083" OD, 0.063" ID, 0.01" Wall, 36" Length Feature

• Drawn
• Full Hard Temper
• Stainless Steel Type 316 Regular Wall
• Corrosion Resistant
• Tight Tolerances

Type 316 Stainless Steel Full Hard, TIG Welded and Drawn tubing is a hard-tempered, small-bore tubing used to make spacers, needles, guide wire assemblies, cannulas, capillary Tubing etc. and is widely applied in the medical, mechanical, electronic, chemical and aeronautical fields. Commonly called seamless because of its cosmetic appearance. Our Stainless Steel 316 Hypodermic Tubing is molybdenum bearing austenitic steel containing a higher percentage of nickel and a smaller percentage of chromium compared to 304. The higher corrosion resistance of 316 Stainless vs. 304 Stainless is particularly useful when working with phosphoric and acetic acids.

Copper C122 Seamless Round Tubing, 1/8" OD, 0.097" ID, 0.014" Wall, 36" Length

Copper C122 Seamless Round Tubing, 1/8" OD, 0.097" ID, 0.014" Wall, 36" Length Review

See more picture @ amazon.com

Copper C122 Seamless Round Tubing, 1/8" OD, 0.097" ID, 0.014" Wall, 36" Length Feature

• ASTM B75
• Corrosion Resistant
• Telescoping
• Seamless construction
• Easily Soldered

Round copper telescoping tubing seamless half hard ASTM B-82

Copper C122 Seamless Round Tubing, 3/32" OD, 0.06575" ID, 0.014" Wall, 12" Length (Pack of 6)

Copper C122 Seamless Round Tubing, 3/32" OD, 0.06575" ID, 0.014" Wall, 12" Length (Pack of 6) Review

See more picture @ amazon.com

Copper C122 Seamless Round Tubing, 3/32" OD, 0.06575" ID, 0.014" Wall, 12" Length (Pack of 6) Feature

• ASTM B75
• Corrosion Resistant
• Telescoping
• Seamless construction
• Easily Soldered

Round copper telescoping tubing seamless half hard ASTM B-86

Ridgid 32975 1/8-Inch to 5/8-Inch Close Quarters Tubing Cutter

Ridgid 32975 1/8-Inch to 5/8-Inch Close Quarters Tubing Cutter Review

See more picture @ amazon.com

Ridgid 32975 1/8-Inch to 5/8-Inch Close Quarters Tubing Cutter Feature

• Model 103
• Capacity: 1/8-Inch-5/8-Inch
• Specifically designed for use in restricted spaces
• Useful for small diameter, hard and soft copper, aluminum, brass and plastic tubing
• Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool

Designed for use in restricted spaces on small diameter, hard and soft copper, aluminum, brass, and plastic tubing. Strong, lightweight slide and wheel housing, large knurled feed screw knob gives wasy control of cutting pressure for clean cuts. The model 117 and 118 have all of the features on the No. 101 plus a self-feeding cutter wheel that automatically cuts after tightening the knob only once. The model 117 features a special knob for easier tightening of the feedscrew.

Clear Polycarbonate Tubing, 1-1/8" ID, 1-1/4" OD, 1/16" Wall, 3' Length

Clear Polycarbonate Tubing, 1-1/8" ID, 1-1/4" OD, 1/16" Wall, 3' Length Review

See more picture @ amazon.com

Polycarbonate is a transparent high molecular weight, linear, low-crystalline plastic. It is generally sought out for its very high impact resistance which approaches 30 times that of safety glass. Light transmittance is 90 percent. In addition to being a very hard plastic, it has a very high modulus of elasticity making it resistant to creep; it has excellent electrical resistivity, and an operating temperature range of -275 F to 250 F. It is generally unaffected by greases, oils and acids. Hardness is 112-125 Rockwell R (73-78 M Scale). Heat deflection temperature is 275-285 Degrees F at 264 PSI. Easily fabricated by machining, drilling, and sawing with a low likelihood of cracking or chipping. Solvent resistance is poor but polycarbonate is easily bonded. Prolonged exposure to solvents with the material under stress will result in crazing and cracking.

Clear Tygon S-50-HL Medical Tubing, 1/32" ID, 3/32" OD, 1/32" Wall, 10' Length

Clear Tygon S-50-HL Medical Tubing, 1/32" ID, 3/32" OD, 1/32" Wall, 10' Length Review

See more picture @ amazon.com

Tygon S-50-HL Medical Surgical Tubing was originally developed for use in cardiac surgery. The consistent quality provides dependable performance in medical device applications. It has been fully tested for biological safety to the ISO 10993 standard. Durometer hardness: Shore A 66. Tygon Medical/Surgical Tubing can be sterilized by radiation, ethylene oxide, steam or chemical methods. Flexible and resilient with established performance in peristaltic pump applications.

Insultab 3020000C1A5 HS-105 2", 10' Clear Polyvinylchloride Heat Shrink Tubing

Insultab 3020000C1A5 HS-105 2", 10' Clear Polyvinylchloride Heat Shrink Tubing Review

See more picture @ amazon.com

Insultab 3020000C1A5 HS-105 2", 10' Clear Polyvinylchloride Heat Shrink Tubing Feature

• Specifically designed for use with PVC jacketed wire and cable
• Material is 30% stronger than polyolefin
• SAE-AMS-DTL 23053/2 Class 2; UL Subject 224 VW-1; CSA OFT rated for 600V; ASTM D3150
• Minimum shrink temperature 100ºC (212ºF)
• Operating temperature range: -20ºC to 105ºC (-4ºF to 221ºF)

HS-105 premium quality, all-purpose, rugged, highly flexible, 2:1 shrink ratio PVC heat shrink tubing is highly flame retardant and provides superior abrasion, chemical and UV resistance. Use in demanding electronic, electrical, and mechanical applications, indoors and outside, to insulate, identify, seal, protect, bundle and beautify. Clear tubing is ‘crystal clear', allowing for visual inspection of substrates. Low shrink temperature prevents heat damage to enclosed, underlying or adjacent components. Tensile Strength: 3000 psi. Dielectric Strength: 1,083 vpm. Lead-free and RoHS Compliant. Made in the USA

Clear Tygon R3603 Laboratory Tubing, 1/32" ID, 3/32" OD, 1/32" Wall, 10' Length

Clear Tygon R3603 Laboratory Tubing, 1/32" ID, 3/32" OD, 1/32" Wall, 10' Length Review

See more picture @ amazon.com

Tygon Formulation R-3603 Laboratory Tubing is Crystal-clear and flexible and can handle virtually all inorganic chemicals found in the lab. It is non-oxidizing and non-contaminating. It is Long-lasting, crack-resistant, and is less permeable than rubber tubing. The glassy-smooth inner bore helps prevent buildup for so that cleaning is facilitated. This tubing is autoclavable. Coils are marked at 1-foot intervals for easy measuring. Remains flexible at -45 F (43 C). Durometer hardness: Shore A, 55.

Miniature Polyimide Tubing, 11 AWG, 0.0880" ID, 0.0925" OD, 0.00225" Wall, 30" Length, Translucent Amber

Miniature Polyimide Tubing, 11 AWG, 0.0880" ID, 0.0925" OD, 0.00225" Wall, 30" Length, Translucent Amber Review

See more picture @ amazon.com

When thin walls, tight tolerances and high strength are required, polyimide is the material of choice. Polyimide is in the select group of super polymers and is now available in micro and miniature tubing sizes. Our tubing has a thermal rating of -452F (-269C) To 700F (371C) for continuous use application with a dielectric constant of 3.4. This material is considered a benchmark for polymers in electrical insulation applications. This tubing exhibits exceptional dimensional stability and has very high burst pressure ratings. Excellent column strength and high stiffness has proven to provide good push and torque properties making polyimide tubing an excellent choice for catheters that are guided through the body's vascular system. Other uses include high strength, temperature and chemical resistant push rod tubes, and miniature structural matrices. This tubing can be steam, gamma or EtO sterilized and has excellent chemical resistance. Polyimide tubing can be bonded with cyanoacrylates, UV and room temperature cure epoxies.

Blue Nylon 12 Flexible Metric Tubing, 4mm ID, 6mm OD, 1mm Wall, 25' Length

Blue Nylon 12 Flexible Metric Tubing, 4mm ID, 6mm OD, 1mm Wall, 25' Length Review

See more picture @ amazon.com

Nylon 12 Metric Tubing offers very low moisture absorption and will not become brittle or swell because of water. Excellent resistance to flexural fatigue, tube vibration and movement. Nylon 12 tubing is lightweight and posses outstanding bend radii and pressure ratings. It is also resistant to crushing, abrasion and cracking.

Clear Tygon R3603 Laboratory Tubing, 1/16" ID, 1/8" OD, 1/32" Wall, 50' Length

Clear Tygon R3603 Laboratory Tubing, 1/16" ID, 1/8" OD, 1/32" Wall, 50' Length Review

See more picture @ amazon.com

Tygon Formulation R-3603 Laboratory Tubing is Crystal-clear and flexible and can handle virtually all inorganic chemicals found in the lab. It is non-oxidizing and non-contaminating. It is Long-lasting, crack-resistant, and is less permeable than rubber tubing. The glassy-smooth inner bore helps prevent buildup for so that cleaning is facilitated. This tubing is autoclavable. Coils are marked at 1-foot intervals for easy measuring. Remains flexible at -45 F (43 C). Durometer hardness: Shore A, 55.

50 Feet Black Rubber Latex Tubing 3/8"OD 1/4"ID (#804R)

50 Feet Black Rubber Latex Tubing 3/8"OD 1/4"ID (#804R) Review

See more picture @ amazon.com

50 Feet Black Rubber Latex Tubing 3/8"OD 1/4"ID (#804R) Feature

• NOTE: TUBING MAY NOT BE CONTINUOUS, THIS TUBING IS FACTORY PACKED IN 1 -3 SEGMENTS
• Crossectional Dimensions: 3/8" OD 1/4" ID 1/16" Wall
• Total Tubing Length: 50 feet
• High Quality Natural Latex made in the USA by Kent Elastomer and guaranteed fresh.
• Physical Properties: Modulus at 300% 190 PSI Max, Tensile 3,500 PSI Min, Shore A Durometer Hardness 35±5, Elongation at Break 750% Min, Specific Gravity 0.95

50 foot reel of black latex tubing manufactured in the U.S.A. by Kent Elastomer. The crossectional dimensions are 3/8" OD 1/4" ID 1/16" Wall. The tubing is brand new, guaranteed fresh, on a reel and in the original manufacturer's packaging. Please note the tubing may not be continuous and is normally packed in 1 to 3 segments totaling 50 feet. Caution: Not to be handled by those allergic to latex.