Polycarbonate Tubing, 1/2" ID x 5/8" OD x 1/16" Wall, Clear Color 24" L

Polycarbonate Tubing, 1/2" ID x 5/8" OD x 1/16" Wall, Clear Color 24" L Review

Polycarbonate Tubing, 1/2" ID x 5/8" OD x 1/16" Wall, Clear Color 24" L Feature

• Operating temperature range of -275 F to 250 F
• Transparent
• Very High Impact Resistance
• Easily Solvent Bonded
• Easily Fabricated

Polycarbonate is a transparent high molecular weight, linear, low-crystalline plastic. It is generally sought out for its very high impact resistance which approaches 30 times that of safety glass. Light transmittance is 90 percent. In addition to being a very hard plastic, it has a very high modulus of elasticity making it resistant to creep; it has excellent electrical resistivity, and an operating temperature range of -275 F to 250 F. It is generally unaffected by greases, oils and acids. Hardness is 112-125 Rockwell R (73-78 M Scale). Heat deflection temperature is 275-285 Degrees F at 264 PSI. Easily fabricated by machining, drilling, and sawing with a low likelihood of cracking or chipping. Solvent resistance is poor but polycarbonate is easily bonded. Prolonged exposure to solvents with the material under stress will result in crazing and cracking.

Translucent Amber Miniature Polyimide Tubing, 29 AWG, 0.0113" ID, 0.0133" OD, 0.0010" Wall, 30" Length

Translucent Amber Miniature Polyimide Tubing, 29 AWG, 0.0113" ID, 0.0133" OD, 0.0010" Wall, 30" Length Review

When thin walls, tight tolerances and high strength are required, polyimide is the material of choice. Polyimide is in the select group of super polymers and is now available in micro and miniature tubing sizes. Our tubing has a thermal rating of -452F (-269C) To 700F (371C) for continuous use application with a dielectric constant of 3.4. This material is considered a benchmark for polymers in electrical insulation applications. This tubing exhibits exceptional dimensional stability and has very high burst pressure ratings. Excellent column strength and high stiffness has proven to provide good push and torque properties making polyimide tubing an excellent choice for catheters that are guided through the body's vascular system. Other uses include high strength, temperature and chemical resistant push rod tubes, and miniature structural matrices. This tubing can be steam, gamma or EtO sterilized and has excellent chemical resistance. Polyimide tubing can be bonded with cyanoacrylates, UV and room temperature cure epoxies.

FLINT GLASS TUBING, 10MM OD X 1' Length

FLINT GLASS TUBING, 10MM OD X 1' Length Review

FLINT GLASS TUBING, 10MM OD X 1' Length

Raychem RNF-100-1/8-BK Polyolefin Heat Shrink Tubing .125" ID, 48" Length

Raychem RNF-100-1/8-BK Polyolefin Heat Shrink Tubing .125" ID, 48" Length Review

Raychem RNF-100-1/8-BK Polyolefin Heat Shrink Tubing .125" ID, 48" Length Feature

• AMS-DTL-23053/5, Class 1 UL E35586 600V, 125C
• Shrink Ratio 2:1
• Minimum shrink temperature 95C (203F)
• Operating temperature range -55C (-67F) to 135C (275F)
• Flame Retardant

RNF-100 shrink tubing is flame retardant with superior abrasion and chemical resistance when compared with that of many flexible, general purpose polyolefin shrink tubing materials. Considered a bench mark in military and industrial applications for general purpose use. Widely used to provide insulation and strain relief of wire terminations and connections. Used for jacketing wire bundles in light-duty applications.

Insultab 3005000C1A5 HS-105 1/2", 50' Clear Polyvinylchloride Heat Shrink Tubing

Insultab 3005000C1A5 HS-105 1/2", 50' Clear Polyvinylchloride Heat Shrink Tubing Review

Insultab 3005000C1A5 HS-105 1/2", 50' Clear Polyvinylchloride Heat Shrink Tubing Feature

• Specifically designed for use with PVC jacketed wire and cable
• Material is 30% stronger than polyolefin
• SAE-AMS-DTL 23053/2 Class 2; UL Subject 224 VW-1; CSA OFT rated for 600V; ASTM D3150
• Minimum shrink temperature 100ºC (212ºF)
• Operating temperature range: -20ºC to 105ºC (-4ºF to 221ºF)

HS-105 premium quality, all-purpose, rugged, highly flexible, 2:1 shrink ratio PVC heat shrink tubing is highly flame retardant and provides superior abrasion, chemical and UV resistance. Use in demanding electronic, electrical, and mechanical applications, indoors and outside, to insulate, identify, seal, protect, bundle and beautify. Clear tubing is ‘crystal clear', allowing for visual inspection of substrates. Low shrink temperature prevents heat damage to enclosed, underlying or adjacent components. Tensile Strength: 3000 psi. Dielectric Strength: 1,083 vpm. Lead-free and RoHS Compliant. Made in the USA

PrimoFlex Pro LRT Clear Tubing -7/16in. ID X 5/8in. OD (10ft pack)

PrimoFlex Pro LRT Clear Tubing -7/16in. ID X 5/8in. OD (10ft pack) Review

PrimoFlex Pro LRT Clear Tubing -7/16in. ID X 5/8in. OD (10ft pack) Feature

• LRT (Low Radius Technology) - Patent Pending
• Performs well at low temperatures
• Anti-Microbial
• Smooth low friction inner bore
• Tack free outer surface

PrimoFlex Pro LRT is designed and manufactured to exacting standards for today's high performance PC water cooling systems. Low Radius Technology allows for tighter bends without the kinking that can cause cooling failures or reduce performance. Our special Anti-Microbial formula helps keep your cooling loop pristine-which keeps flow rates up and reduces maintenance. PrimoFlex Pro LRT wouldn't be the choice of pro modders and high performance water coolers if it also didn't have killer looks and excellent sub zero performance. Available in an ever increasing range of UV colors as well as Clear, Black, and White. PrimoFlex Pro LRT stays flexible even when subjected to the lowest temperatures. Our proprietary blend of extremely low durometer PVC (polyvinyl chloride) and a more rigid polymer resin gives PrimoFlex Pro LRT its unbeatable bend ratio and durability. Even under exacting laboratory set-ups with abrupt small radius bends and multiple direction changes, PrimoFlex PRO LRT tubing resists twisting and collapse-a common problem when using other lesser brands. PrimoFlex Pro LRT - Choice of the Pros, because everything else is just tubing. This 7/16" Inner Diameter (11.112 mm), 5/8" Outer Diameter (15.875 mm) tubing has a wall thickness of only 3/32 inch (2.381 mm).

Yellow Tygon F-4040-A Fuel Tubing, 3/8" ID, 1/2" OD, 1/16" Wall, 5' Length

Yellow Tygon F-4040-A Fuel Tubing, 3/8" ID, 1/2" OD, 1/16" Wall, 5' Length Review

Tygon fuel and lubrication tubing is formulated to resist hydrocarbons and has a lower rate of permeation than competitive tubing. It resists the swelling and hardening caused by hydrocarbon based fluids which can lead to cracking and leakage. Its minimum extractability safeguards the liquid or vapor being transferred against contamination. Typical applications include small engine fuel lines, general automotive, lawn and garden equipment, coolant transfer, heating fuels, cutting compounds, and lubrication lines. Durometer hardness is 57 Shore A. Temperature Range is -35F to 165F. Color is transparent yellow for easy identification.

Stainless Steel 316 Hypodermic Round Tubing, 27 Gauge, 0.0163" OD, 0.008" ID, 0.004" Wall, 60" Length (Pack of 10)

Stainless Steel 316 Hypodermic Round Tubing, 27 Gauge, 0.0163" OD, 0.008" ID, 0.004" Wall, 60" Length (Pack of 10) Review

Stainless Steel 316 Hypodermic Round Tubing, 27 Gauge, 0.0163" OD, 0.008" ID, 0.004" Wall, 60" Length (Pack of 10) Feature

• Welded and drawn construction
• Full Hard Temper
• Stainless Steel Type 316 provides excellent corrosion resistance
• Extremely small outside and inside diameters for precision applications
• Tight tolerances

Type 316 Stainless Steel Full Hard, TIG Welded and Drawn tubing is a hard-tempered, small-bore tubing used to make spacers, needles, guide wire assemblies, cannulas, capillary Tubing etc. and is widely applied in the medical, mechanical, electronic, chemical and aeronautical fields. Commonly called seamless because of its cosmetic appearance. Our Stainless Steel 316 Hypodermic Tubing is molybdenum bearing austenitic steel containing a higher percentage of nickel and a smaller percentage of chromium compared to 304. The higher corrosion resistance of 316 Stainless vs. 304 Stainless is particularly useful when working with phosphoric and acetic acids.

Brass C260 Seamless Round Tubing, 5/32" OD,0.128"ID, 0.014" Wall, 36" Length

Brass C260 Seamless Round Tubing, 5/32" OD,0.128"ID, 0.014" Wall, 36" Length Review

Brass C260 Seamless Round Tubing, 5/32" OD,0.128"ID, 0.014" Wall, 36" Length Feature

• ASTM B135
• Good corrosion resistance
• Telescoping
• Alloy C260
• Seamless construction

Precision seamless drawn 1/2 to 3/4 hard brass Telescoping Tubing is the answer to many problems in the development of experimental models and prototypes. Telescoping Tubing can be easily soldered, brazed and flared to accept fittings. Advantageous when a reduction in size, weight or flow is desired. Each telescopes into the next larger size. General purpose 1/2 to 3/4 hard brass. Approximate composition: 65-70 percent copper and 30-35 percent zinc

Brass C260 Seamless Round Tubing, 5/32" OD,0.128"ID, 0.014" Wall, 12" Length (Pack of 12)

Brass C260 Seamless Round Tubing, 5/32" OD,0.128"ID, 0.014" Wall, 12" Length (Pack of 12) Review

Brass C260 Seamless Round Tubing, 5/32" OD,0.128"ID, 0.014" Wall, 12" Length (Pack of 12) Feature

• ASTM B135
• Good corrosion resistance
• Telescoping
• Alloy C260
• Seamless construction

Precision seamless drawn 1/2 to 3/4 hard brass Telescoping Tubing is the answer to many problems in the development of experimental models and prototypes. Telescoping Tubing can be easily soldered, brazed and flared to accept fittings. Advantageous when a reduction in size, weight or flow is desired. Each telescopes into the next larger size. General purpose 1/2 to 3/4 hard brass. Approximate composition: 65-70 percent copper and 30-35 percent zinc

Polyimide Micro Tubing .0253" ID x .0273" OD x +/-.00025" Wall, USP Class VI 72" Length

Polyimide Micro Tubing .0253" ID x .0273" OD x +/-.00025" Wall, USP Class VI 72" Length Review

Polyimide Micro Tubing .0253" ID x .0273" OD x +/-.00025" Wall, USP Class VI 72" Length Feature

• Super High Temperature Rating 700 F
• Micro Sizes
• Dielectric constant of 3.4
• USP Class VI
• ETO, Gamma, Steam Sterilizable

When thin walls, tight tolerances and high strength are required, Polyimide is the material of choice. Polyimide is in the select group of super polymers and is now available in micro and miniature tubing sizes from Small Parts. Our tubing has a thermal rating of -452F (-269C) To 700F (371C) for continuous use application with a dielectric constant of 3.4. This material is considered a benchmark for polymers in electrical insulation applications. This tubing exhibits exceptional dimensional stability and has very high burst pressure ratings. Excellent column strength and high stiffness has proven to provide good push and torque properties making polyimide tubing an excellent choice for catheters that are guided through the body's vascular system. Other uses include high strength, temperature and chemical resistant push rod tubes, and miniature structural matrices. This tubing can be steam, gamma or EtO sterilized and has excellent chemical resistance. Polyimide tubing can be bonded with cyanoacrylates, UV and room temperature cure epoxies.

White SiliconeTubing, 1/2"ID, 5/8"OD, 1/16" Wall, 10' Length

White SiliconeTubing, 1/2"ID, 5/8"OD, 1/16" Wall, 10' Length Review

Silicone rubber is able to resist extreme temperature variances, from -150 Deg F to 500 Deg F (-101C to 260C), and has a natural translucent color for visual flow. Resists U.V. ozone gases, moisture and temperature. Resilient, stretchable and resistant to compression set and is odorless, tasteless and inert. Silicone is extremely resistant to ozone and corona concentration over long time periods. It also has good electrical properties, along with the ability to self-extinguish typically within 3 -8 seconds, making silicone an excellent choice for appliance and computer applications. It contains no sulphur or other acid-producing chemicals so it does not cause staining, corrosion or deterioration of other materials it contacts. Standard barbed fittings and lined hose clamps are recommended for most applications. Durometer reading: 50A.

Clear Tygon B-44-3 Beverage Tubing, 1/16" ID, 1/8" OD, 1/32" Wall, 10' Length

Clear Tygon B-44-3 Beverage Tubing, 1/16" ID, 1/8" OD, 1/32" Wall, 10' Length Review

Tygon B443 Beverage Tubing is specially formulated for transferring a wide variety of beverages including soft drinks, fruit juices, flavored teas and bottled water. In virtually all cases, Tygon Beverage Tubing will not affect the taste or odor of product transferred through it, while its excellent non-wetting properties facilitate complete drainage and permit simple flush cleaning. Many of the unique properties inherent to Tygon Beverage Tubing also apply to a wide variety of complex applications ranging from fine cosmetic production to the dispensing of water based printing inks found in the publishing industry. The versatility and proven performance of Tygon Beverage Tubing have made it today's most widely specified clear, flexible plastic tubing. Lightweight and flexible for easy, quick installation, and broad chemical resistance to virtually all non solvent chemicals.

Bel-Art 182280000 Scienceware Acetal Plastic Tubing Mid-Range Clamp, Pack of 12

Bel-Art 182280000 Scienceware Acetal Plastic Tubing Mid-Range Clamp, Pack of 12 Review

Bel-Art 182280000 Scienceware Acetal Plastic Tubing Mid-Range Clamp, Pack of 12 Feature

• 15-position stepped adjustment controls flow from full open to complete closure
• Will not distort, rust, or corrode
• Fits tubing from 3.2 to 11mm (1/8 to 7/16") O.D
• 12 per bag

Acetal Plastic Tubing Clamps will not distort, rust, or corrode. Mid-Range clamp has 15-position stepped adjustment that controls flow from full open to complete closure. Fits tubing from 3.2 to 11mm (1/8 to 7/16") O.D. 12 per bag.