Clear Tygon R3603 Laboratory Tubing, 1/4" ID, 5/16" OD, 1/32" Wall, 10' Length

Clear Tygon R3603 Laboratory Tubing, 1/4" ID, 5/16" OD, 1/32" Wall, 10' Length Review

Tygon Formulation R-3603 Laboratory Tubing is Crystal-clear and flexible and can handle virtually all inorganic chemicals found in the lab. It is non-oxidizing and non-contaminating. It is Long-lasting, crack-resistant, and is less permeable than rubber tubing. The glassy-smooth inner bore helps prevent buildup for so that cleaning is facilitated. This tubing is autoclavable. Coils are marked at 1-foot intervals for easy measuring. Remains flexible at -45 F (43 C). Durometer hardness: Shore A, 55.

Brass C330 Round Tubing, 1/4" OD, 0.152" ID, 0.049" Wall, 36" Length

Brass C330 Round Tubing, 1/4" OD, 0.152" ID, 0.049" Wall, 36" Length Review

Brass C330 Round Tubing, 1/4" OD, 0.152" ID, 0.049" Wall, 36" Length Feature

• ASTM B135
• Type C-330
• Hard Temper
• Good machinability
• Excellent Cold Workability

Brass Type C-330 Hard Temper ASTM-B135 Round Tubing low-leaded (0.5 Percent Pb) Brass C330 combines good machinability and excellent cold workability. It is fabricated by forming and bending, machining, piercing and punching.

3M 1/8 Black Heat Shrink Tubing 4 ft.

3M 1/8 Black Heat Shrink Tubing 4 ft. Review

3M™ heat shrink shrinks to half of its original size (2:1) and offers an outstanding balance of electrical, physical and chemical properties for a wide variety of applications. Rated for 275ºF(135ºC) continuous operation.

Black Viton Firm Tubing, 3/8" ID, 1/2" OD, 1/16" Wall, 1' Length

Black Viton Firm Tubing, 3/8" ID, 1/2" OD, 1/16" Wall, 1' Length Review

This is a high performance synthetic rubber with excellent temperature resistance, -10 F to 400 F (-23 C to 204 C) continuously. Viton offers the widest range of fluid and chemical resistance of any commercial rubber. Excellent resistance to oils, fuels, lubricants and most mineral acids. Applications include fuel and oil lines, cable jacketing, solvents, chemical lines, hot lubrication, seals O-Rings. Standard barbed fittings and hose clamps are recommended for most applications. Durometer : 75A. Made with Viton Type A.

Natural Nylon 12 Semi-Rigid Tubing, 0.075" ID, 0.125" OD, 0.025" Wall, 25' Length

Natural Nylon 12 Semi-Rigid Tubing, 0.075" ID, 0.125" OD, 0.025" Wall, 25' Length Review

Nylon 12 Tubing - Very low moisture absorption: 1.4 percent maximum (at 73 Degrees F) Will not become brittle or swell because of water.Excellent resistance to flexural fatigue, tube vibration, and movement. Lightweight with excellent bend radii and pressure ratings. Resists crushing, abrasion,and cracking. Maximum operating temperature is 212 degrees F. Brittle temperature:-90 degrees F

Clear Tygon B-44-3 Beverage Tubing, 3/8" ID, 1/2" OD, 1/16" Wall, 10' Length

Clear Tygon B-44-3 Beverage Tubing, 3/8" ID, 1/2" OD, 1/16" Wall, 10' Length Review

Tygon B443 Beverage Tubing is specially formulated for transferring a wide variety of beverages including soft drinks, fruit juices, flavored teas and bottled water. In virtually all cases, Tygon Beverage Tubing will not affect the taste or odor of product transferred through it, while its excellent non-wetting properties facilitate complete drainage and permit simple flush cleaning. Many of the unique properties inherent to Tygon Beverage Tubing also apply to a wide variety of complex applications ranging from fine cosmetic production to the dispensing of water based printing inks found in the publishing industry. The versatility and proven performance of Tygon Beverage Tubing have made it todays most widely specified clear, flexible plastic tubing. Lightweight and flexible for easy, quick installation, and broad chemical resistance to virtually all non solvent chemicals.

Brass C260 Rectangular Tubing, 3/32" x 3/16", 0.014" Wall, 12" Length (Pack of 9)

Brass C260 Rectangular Tubing, 3/32" x 3/16", 0.014" Wall, 12" Length (Pack of 9) Review

Brass C260 Rectangular Tubing, 3/32" x 3/16", 0.014" Wall, 12" Length (Pack of 9) Feature

• Meets requirements for ornamental applications
• ASTM B135
• Good corrosion resistance
• Easily soldered
• Good Machinability

Precision seamless drawn brass Rectangular Tubing is the answer to many problems in the development of experimental models and prototypes. Rectangular tubing can be easily soldered and brazed. General purpose 1/2 to 3/4 hard brass. Approximate composition: 65-70% copper and 30-35% zinc.

Clear Tygon Micro Bore PVC Tubing, 0.040" ID, 0.070" OD, 0.015" Wall, 10' Length

Clear Tygon Micro Bore PVC Tubing, 0.040" ID, 0.070" OD, 0.015" Wall, 10' Length Review

Even in these micro-bore sizes, Tygon(R) tubing is stiff enough to allow easy handling but tough enough to resist puncturing. It is used in catheters for intravenous and arterial infusion as well as in a variety of other medical applications. It is nontoxic, blood compatible, and autoclavable. U.S.P. Class VI compliant.

Stainless Steel 316 Hypodermic Round Tubing, 9 Gauge, 0.1480" OD, 0.128" ID, 0.01" Wall, 60" Length

Stainless Steel 316 Hypodermic Round Tubing, 9 Gauge, 0.1480" OD, 0.128" ID, 0.01" Wall, 60" Length Review

Stainless Steel 316 Hypodermic Round Tubing, 9 Gauge, 0.1480" OD, 0.128" ID, 0.01" Wall, 60" Length Feature

• Welded and drawn construction
• Full Hard Temper
• Stainless Steel Type 316 provides excellent corrosion resistance
• Extremely small outside and inside diameters for precision applications
• Tight tolerances

Type 316 Stainless Steel Full Hard, TIG Welded and Drawn tubing is a hard-tempered, small-bore tubing used to make spacers, needles, guide wire assemblies, cannulas, capillary Tubing etc. and is widely applied in the medical, mechanical, electronic, chemical and aeronautical fields. Commonly called seamless because of its cosmetic appearance. Our Stainless Steel 316 Hypodermic Tubing is molybdenum bearing austenitic steel containing a higher percentage of nickel and a smaller percentage of chromium compared to 304. The higher corrosion resistance of 316 Stainless vs. 304 Stainless is particularly useful when working with phosphoric and acetic acids.

Polycarbonate Tubing, 1 7/8" ID x 2" OD x 1/16" Wall, Clear Color 36" L

Polycarbonate Tubing, 1 7/8" ID x 2" OD x 1/16" Wall, Clear Color 36" L Review

Polycarbonate Tubing, 1 7/8" ID x 2" OD x 1/16" Wall, Clear Color 36" L Feature

• Operating temperature range of -275 F to 250 F
• Transparent
• Very High Impact Resistance
• Easily Solvent Bonded
• Easily Fabricated

Polycarbonate is a transparent high molecular weight, linear, low-crystalline plastic. It is generally sought out for its very high impact resistance which approaches 30 times that of safety glass. Light transmittance is 90 percent. In addition to being a very hard plastic, it has a very high modulus of elasticity making it resistant to creep; it has excellent electrical resistivity, and an operating temperature range of -275 F to 250 F. It is generally unaffected by greases, oils and acids. Hardness is 112-125 Rockwell R (73-78 M Scale). Heat deflection temperature is 275-285 Degrees F at 264 PSI. Easily fabricated by machining, drilling, and sawing with a low likelihood of cracking or chipping. Solvent resistance is poor but polycarbonate is easily bonded. Prolonged exposure to solvents with the material under stress will result in crazing and cracking.